top of page

EV kits

These products are provided as a kit. The connection should be made by a qualified person who is trained in electrical engineering and familiar with the characteristics and safety requirements of lithium batteries. Proper integration, installation, cabling and interconnect wiring, and determination of system suitability are entirely the responsibility of the installer. If you're not sure if you have the skills to complete this setup, we encourage you to attend an upcoming Abigail Motors workshop.

IMG_0266.JPG

Motor assembly and controller kit
All parameters already set
Can be mounted on mini subframe without modification

IMG_0267.JPG

Peripheral equipment

A set of peripheral equipment that runs on a 12V power supply, such as a radiator and water pump, required for installation.

IMG_4898.jpg
Subframe.png

Mini front Sub-frame
New or refurbished products 

(exchange for used products)

orion2.png

BMS

Ewert Energy Systems Orion BMS2

All parameters are set and a dedicated harness is included.

18kWhbatterypack.png

18kWh Lithium Battery Pack
Dedicated heat and shock resistant stainless steel case

ORANGE CABLE 20AWG.png

Wire for high voltage wiring

2/0 AWG orange cable

Chargeinlet.png

J1772 Charging port for AC charging
Or optionally quick DC charging port

PFC2500Charger.png

AC / DC converter
ELCON PFC2500 with dedicated harness

  • facebook

© 2023Abigail ltd. All right reserved.

bottom of page